No results were found for the filter!
Wooden storage for large vats
The wooden storage for large vats is made of air-dried Douglas fir or oak wood. The wood comes from our own cutting. The bearings are planed and double coated with food-safe clear varnish. The individual elements of the barrel storage...
Dome lid 600 mm - stainless steel
Round dome lid made of V4A stainless steel for installation in vats. Dimensions ca.: Ø 600 mm Dimensions ca.: Ø 1000 mm for vats from 3,000 l
Wooden bung with desulphurization basket
Conical wooden bung with stainless steel eyelet in a set with a stainless steel basket attached to the rope, which allows the hanging of several sulphur cuts in the barrel. Dimensions ca.: Bung: Length: 100 mm Ø: 40 - 60 mm Length rope :...
Wooden bung with sulphur wire
Conical wooden bung with stainless steel eyelet in a set with a stainless steel wire bent at the ends, which allows the sulphur cuts to be hung in the barrel. Dimensions bung ca.: Length: 100 mm Ø: 40 - 60 mm Dimensions stainless steel...
Bung hole ring - stainless steel
Bung hole ring - stainless steel for screwing into the bunghole. Made of high-quality stainless steel from V4A, to be screwed into the bunghole of the barrel. The barrel can then be closed pressure-safe by the corresponding counter...
Red steel racks for 225 l barrels - new
The red racks are used. The racks can be picked up from the front by forklift truck and from the side by pallet truck. Dimension ca.: Width: 144 cm Depth: 61 cm Height: 35 cm
Rack – galvanized – combination for 2 barrels...
Rack – galvanized – combination for 2 barrels 500 l
Concrete drum storage up to 6000 l - second-hand
These concrete drum bearings are approx. 25 years old and are suitable for large drums up to 6000 litres. - Price per single piece The concrete is insensitive to moisture, which prolongs the life of the drum storage system compared to a...
Stainless steel bunghole bush
Stainless steel bunghole bush for screwing into the bunghole, ensures absolute hygiene when filling in and out and impresses with its high-quality appearance. Dimensions ca.: Depth 35 mm Ø 60 mm at the outer point of the Thread runs...
Calotte foot
Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage. The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut...