No results were found for the filter!
The doors are made of stainless steel (V4A) and open to the inside
Rectangular stainless steel door V4A for installation in fermentation tanks and vats. The doors are made of stainless steel (V4A) and open outwards. All visible surfaces are ground and polished, as well as the surfaces that come into...
Round dome lid stainless steel V4A specially shaped for oval and round wooden barrels. The dome lid is attached instead of the bunghole to enable e.g. easier filling and emptying of a rotary fermenter. Diameter approx. 220 mm AISI 316...
Round dome lid made of V4A stainless steel for installation in vats. Dimensions ca.: Ø 600 mm Dimensions ca.: Ø 1000 mm for vats from 3,000 l
The bunghole flap is made of stainless steel (V4A) and is installed in the barrel door.
The bunghole flap is made of stainless steel (V4A) and is installed in the wooden door of the barrel. The flap is inside of the barrel and thanks to the pressure of the wine it is tight. Only if a pipe is inserted you can empty the vat....
Made of stainless steel - for screwing into large casks With plexiglass level indicator
Made of stainless steel - for screwing into large casks With plexiglass level indicator
Bung hole ring - stainless steel for screwing into the bunghole. Made of high-quality stainless steel from V4A, to be screwed into the bunghole of the barrel. The barrel can then be closed pressure-safe by the corresponding counter...
Stainless steel bunghole bush for screwing into the bunghole, ensures absolute hygiene when filling in and out and impresses with its high-quality appearance. Dimensions ca.: Depth 35 mm Ø 60 mm at the outer point of the Thread runs...
Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage. The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut...
Barrel screw 120 mm, 160 mm, 180 mm or 220 mm made of stainless steel for a wooden barrel door. The screw fixes the door at the barrel. Suitable for barrels up to a volume of approx. 450 l. V4A with a MS-hat-screw nut.