No results were found for the filter!
Used barrel lid - Bourbon barrel Lid from a used original 190 l bourbon bass, the barrel lids are cut out, cleaned and glued. On the back of the lid is still the original Charring. On the front you can still find the original print of the original distillery. These...
Barrel lid – reground The barrel heads have been made out of used wine or distillate barrels. They have been cleaned, sanded and glued.
Barrel head shelf with Plexiglas plate This special barrel head allows you to present your good drop behind a Plexiglas pane in true style. This barrel head is made from a used, professionally cleaned and sanded barrel section. The staves were dried and then glued for...
Lid for Bourbon barrels Those barrel lids are prefabricated. They’re made of American Oak ad could be used in professional barrels.
Barrel head - Chestnut flamed & oiled - ø 35 cm Our carpentry workshop produces decorative barrel head sections from chestnut barrels. For chestnut barrels, the head is cut off at 12-14 cm (depending on where the barrel hoops are placed). The barrel head sections are cleaned, sanded,...
Barrel head - ø 58 cm The barrel heads have been cut from old wine barriques to a length of about 9-15 cm (depends on the placement of the hoops).
Barrel head - Scotch flag - ø 58 cm The decorative barrel heads have been made out of old barrels by our carpenters. The wood of the head have been treated with paint and shows the flag of Scotland.
Barrel head - ø 85 cm The decorative barrel heads have been made out of old barrels by our carpenters. The barrel heads have been cut from old wine barriques to a length of about 9-15 cm (depends on the placement of the hoops). The wood of the heads have been...
