No results were found for the filter!
Wooden barrel storage for fermentation vat Wooden barrel storage made of air-dried oak wood from our own cutting for an approx. 6000 l fermentation tank. The dimensions are adapted to the vat and can therefore vary. The eight wooden beams are planed, chamfered and glazed and those are fixed with stainless steel screws. The feet consist of six blocks, each of which is underlaid with solid core boards, so that the...
Used brass tap Used brass tap for draining water from barrels, cysters, rain barrels or other water collectors with a capacity of 500 l or more or as a special decorative element. When ordering in combination with a barrel, we install the tap at the height you specify. Different designs Dimensions approx: length 20 - 30 cm drain: Ø 3 cm Mounting socket Ø 3 - 5 cm
Galvanized rack for on 100 l barrel - single piece Galvanized rack for one 100 l barrel. Dimension ca.: Width: 38cm Depth: 78 cm Height: 36 cm
Oak bearing - cask rack Dimensions approx.: 1000 x 240 x 140 mm Made from oak Air-dried untreated rough saw & planed The lower side is underlaid (screwed with stainless steel screws) with 2 solid core ribs 240 mm x 100 mm (Resopal Massiv D254-60) for water flow 2 bearings are required per barrel.
Acrylic tube for filling level valve for large... Made of stainless steel - for screwing into large casks With plexiglass level indicator
Fill level indicator valve Made of stainless steel - for screwing into large casks With plexiglass level indicator
Rack – galvanized – bottom for 1 barrel 500 l Rack - galvanized - single, for 500 l barrel Dimensions ca.: Width: 90 cm Depth: 76 cm Height: 17 cm
Wooden storage for large vats The wooden storage for large vats is made of air-dried Douglas fir or oak wood. The wood comes from our own cutting. The bearings are planed and double coated with food-safe clear varnish. The individual elements of the barrel storage are fixed with stainless steel screws. The feet of the storage are underlaid with solid core plates. Dimensions ca.: Width: 130 cm Height: 48...
Dome stainless steel 600 mm in dia Round dome lid made of V4A stainless steel for installation in vats and large barrels. Dimensions ca.: Ø 600 mm
Wooden bung with desulphurization basket Conical wooden bung with stainless steel eyelet in a set with a stainless steel basket attached to the rope, which allows the hanging of several sulphur cuts in the barrel. Dimensions ca.: Bung: Length: 100 mm Ø: 40 - 60 mm Length rope : 300 mm Length basket : 220 mm Article price does not include the sulphur cuts . You can buy these below accessories.
Wooden bung with sulphur wire Conical wooden bung with stainless steel eyelet in a set with a stainless steel wire bent at the ends, which allows the sulphur cuts to be hung in the barrel. Dimensions bung ca.: Length: 100 mm Ø: 40 - 60 mm Dimensions stainless steel wire ca.: Length: 250 mm Article price does not include the sulphur cuts . You can buy these below accessories.
Bung hole ring - stainless steel Bung hole ring - stainless steel for screwing into the bunghole. Made of high-quality stainless steel from V4A, to be screwed into the bunghole of the barrel. The barrel can then be closed pressure-safe by the corresponding counter screw. Diameter approx. 58 mm Height approx. 23 mm