No results were found for the filter!
Stainless steel door for installation in round... The doors are made of stainless steel (V4A) and open to the inside
Stainless steel door for installation in... Rectangular stainless steel door V4A for installation in fermentation tanks and vats. The doors are made of stainless steel (V4A) and open outwards. All visible surfaces are ground and polished, as well as the surfaces that come into...
Dome lid 220 mm - stainless steel Round dome lid stainless steel V4A specially shaped for oval and round wooden barrels. The dome lid is attached instead of the bunghole to enable e.g. easier filling and emptying of a rotary fermenter. Diameter approx. 220 mm AISI 316...
Dome lid 600 mm - stainless steel Round dome lid made of V4A stainless steel for installation in vats. Dimensions ca.: Ø 600 mm Dimensions ca.: Ø 1000 mm for vats from 3,000 l
Bunghole flap for stainless steel barrel door The bunghole flap is made of stainless steel (V4A) and is installed in the barrel door.
Bunghole flap for wooden door The bunghole flap is made of stainless steel (V4A) and is installed in the wooden door of the barrel. The flap is inside of the barrel and thanks to the pressure of the wine it is tight. Only if a pipe is inserted you can empty the vat....
Stainless steel bunghole bush Stainless steel bunghole bush for screwing into the bunghole, ensures absolute hygiene when filling in and out and impresses with its high-quality appearance. Dimensions ca.: Depth 35 mm Ø 60 mm at the outer point of the Thread runs...
Calotte foot Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage. The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut...
Mash querl of stainless steel Designed for punching down the mash cake and for the stiring-up of the mash, entirely manufactured of stainless steel with six tines which are coated by syntethic pieces at the tips. Two of the tines are arranged asymmetrically
Filler cap with ball valve The filler cap will be set up at the hole of the barrel to have carbonised beer riped.
compressed air "wine - hener" Racking system for use with oilfree airpressure or CO2, made by stainless steel, for smooth and carefull racking of barrels without using a pump. DIN 40 VT Using: 1. Put in the tool in barrel 2. Close Bung- Compress screw 3. Install...
Refilling can The stainless steel jug is made of polished stainless steel V4A with a capacity of approx. 5 litres.