No results were found for the filter!
Wooden Storage Rack for 390 l Barrel Bell
Wooden storage racks are made from well-seasoned oak, with chamfered edges planed, sanded and glazed.
Wooden oak barrel storage for 225 l barrel - high
Elevated barrel storage for stylish presentation of your barrique barrel in your showroom. Produced is the exceptionally high storage made of air-dried, planed and sanded oak wood. The final treatment is done by a varnish certified for food. This warehouse is adapted to store a barrel with 225 l capacity. We are happy to adapt the size as desired by the customer. On the...
Bunghole flap for wooden door
The bunghole flap is made of stainless steel (V4A) and is installed in the wooden door of the barrel. The flap is inside of the barrel and thanks to the pressure of the wine it is tight. Only if a pipe is inserted you can empty the vat. Available in: 100 mm 120 mm
Cooling spiral for installation in 30 hl...
Cooling spiral for installation in fermenting vats with a diameter of approx. 1550 mm. The spiral is made of stainless steel V4A. Diameter spiral: 1150 mm Cooling surface approx. 0,5 sqm for 30 hl Operating pressure maximum 6 bar
Mash sieve made of stainless steel
Mash sieve made of stainless steel V4A, consisting of the sieve and the frame for removal. The mash strainer is installed inside the fermenter, above the residual or clear drain. Dimensions: (L x W x H) 600 x 400 x 330 mm Stainless steel thickness: 2,5 mm
Mash sieve made of 3d printed PLA
The mash sieve is installed inside the fermentation vat, above the residual or clear drain.
Dome lid 220 mm - stainless steel
Round dome lid stainless steel V4A specially shaped for oval and round wooden barrels. The dome lid is attached instead of the bunghole to enable e.g. easier filling and emptying of a rotary fermenter. Diameter approx. 220 mm AISI 316 quality The dome lid with 220 mm clear width is not only used in rotary fermenters, but in modern vinification also in large barrels in which...
Replacement tip for bung puller
Replacement tip for bung opener made of hardened steel incl. two rivets for fastening. Replacement of the tip: The old tip must be sawed off and removed. Then insert the rod with the new tip through the handle and fasten the collar over the tip using the rivets. The rivets must be tightened on both sides with a hammer.
Wooden barrel storage for fermentation vat
Wooden barrel storage made of air-dried oak wood from our own cutting for an approx. 6000 l fermentation tank. The dimensions are adapted to the vat and can therefore vary. The eight wooden beams are planed, chamfered and glazed and those are fixed with stainless steel screws. The feet consist of six blocks, each of which is underlaid with solid core boards, so that the...
Fill level indicator valve
Made of stainless steel - for screwing into large casks With plexiglass level indicator