No results were found for the filter!
High quality steel tap As an option, we offer the installation of a stainless steel spigot in your barrels.
Refilling can The stainless steel jug is made of polished stainless steel V4A with a capacity of approx. 5 litres.
Cooling spiral for installation in 30 hl... Cooling spiral for installation in fermenting vats with a diameter of approx. 1550 mm. The spiral is made of stainless steel V4A. Diameter spiral: 1150 mm Cooling surface approx. 0,5 sqm for 30 hl Operating pressure maximum 6 bar
Mash sieve made of stainless steel Mash sieve made of stainless steel V4A, consisting of the sieve and the frame for removal. The mash strainer is installed inside the fermenter, above the residual or clear drain. Dimensions: (L x W x H) 600 x 400 x 330 mm Stainless steel...
Fill level indicator valve Made of stainless steel - for screwing into large casks With plexiglass level indicator
Wooden bung with sulphur wire Conical wooden bung with stainless steel eyelet in a set with a stainless steel wire bent at the ends, which allows the sulphur cuts to be hung in the barrel. Dimensions bung ca.: Length: 100 mm Ø: 40 - 60 mm Dimensions stainless steel...
Wooden bung with desulphurization basket Conical wooden bung with stainless steel eyelet in a set with a stainless steel basket attached to the rope, which allows the hanging of several sulphur cuts in the barrel. Dimensions ca.: Bung: Length: 100 mm Ø: 40 - 60 mm Length rope :...
Bung hole ring - stainless steel Bung hole ring - stainless steel for screwing into the bunghole. Made of high-quality stainless steel from V4A, to be screwed into the bunghole of the barrel. The barrel can then be closed pressure-safe by the corresponding counter...
Stainless steel bunghole bush Stainless steel bunghole bush for screwing into the bunghole, ensures absolute hygiene when filling in and out and impresses with its high-quality appearance. Dimensions ca.: Depth 35 mm Ø 60 mm at the outer point of the Thread runs...
Calotte foot Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage. The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut...
Barrel screw for wooden barrel door Barrel screw 120 mm, 160 mm, 180 mm or 220 mm made of stainless steel for a wooden barrel door. The screw fixes the door at the barrel. Suitable for barrels up to a volume of approx. 450 l. V4A with a MS-hat-screw nut.