No results were found for the filter!
Diving shell The diving shell is inserted in the wooden vat and is used as a connection for the thermometer.
Barrel screw for wooden barrel door Barrel screw 120 mm, 160 mm, 180 mm or 220 mm made of stainless steel for a wooden barrel door. The screw fixes the door at the barrel. Suitable for barrels up to a volume of approx. 450 l. V4A with a MS-hat-screw nut.
Wooden bung with desulphurization basket Conical wooden bung with stainless steel eyelet in a set with a stainless steel basket attached to the rope, which allows the hanging of several sulphur cuts in the barrel. Dimensions ca.: Bung: Length: 100 mm Ø: 40 - 60 mm Length rope :...
Wooden bung with sulphur wire Conical wooden bung with stainless steel eyelet in a set with a stainless steel wire bent at the ends, which allows the sulphur cuts to be hung in the barrel. Dimensions bung ca.: Length: 100 mm Ø: 40 - 60 mm Dimensions stainless steel...
Cooling spiral for installation in 30 hl... Cooling spiral for installation in fermenting vats with a diameter of approx. 1550 mm. The spiral is made of stainless steel V4A. Diameter spiral: 1150 mm Cooling surface approx. 0,5 sqm for 30 hl Operating pressure maximum 6 bar
Mash sieve made of stainless steel Mash sieve made of stainless steel V4A, consisting of the sieve and the frame for removal. The mash strainer is installed inside the fermenter, above the residual or clear drain. Dimensions: (L x W x H) 600 x 400 x 330 mm Stainless steel...
Mash sieve made of 3d printed PLA The mash sieve is installed inside the fermentation vat, above the residual or clear drain.
