Calotte foot
- Order number: 1839.2
- Note: mit Platte und 4 Schrauben
Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage.
The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut welded to the plate. The counter nut located further below allows exact adjustment to the desired height. The bolt is placed on the bottom of the base in the matching recess of the round plate.
By the individual adjustment of the four calotte feet it is possible to compensate an angle of up to 14 degrees and guarantees the horizontal storage of your large barrels, independent of unevenness on the floor. The floor storage systems do not stand on damp ground, so that the greatest possible hygiene is guaranteed.
The calotte feet are also used for the storage of stainless steel tanks.
E-polished V2A
Plate 180 x 180 mm x 8 mm with 3/4" socket
Calotte foot 3/4" fine thread with lock nut
Plate 100 x 12 mm
Total height 120 mm
Compensation angle 14 degrees
Required are 4 pieces per drum storage