Skip to main content

EDER - FassStolz® 600 l oval - German Oak

Product information "EDER - FassStolz® 600 l oval - German Oak"

Oval wooden storage casks with a capacity of 600 l

Made from seasoned oak wood, origin Palatinate Forest / Northern Vosges!
Fine-grained on red sandstone grown about 200 years, sustainably logged according to certification Naturland or PEFC.
Growing area: Palatinate Forest

Hot-dip galvanised hoops
Toasting: according to customer requirements

All casks are equipped with a bottom middle piece for possible door installation and a central stave in the belly area for possible installation of residual drains. Before delivery each barrel is checked for tightness.

Fluctuations in capacity and dimensions are possible

The barrels are equipped with hot-dip galvanised hoops, a silicone bung and a wooden door as standard. They are treated with linseed oil or a clear, food-certified and breathable varnish (please specify under "comments" when ordering).

Please note: the photos of the articles show special equipment, which is subject to surcharge

Dimensions in mm approx.:
Stave thickness: 45/50 mm
Stave lenght: 1100 mm
Height (belly): 1250 mm
Axis (belly): 900 mm

Option stainless steel hoops:
width: 60 mm and 70 mm
Surcharge per cask or barrel and on request.

Delivery and assembly costs are calculated individually. Delivery time by arrangement.

Suitable accessories can be found below. Not found the right barrel size? Ask without obligation for a personal offer.

Characteristics from "EDER - FassStolz® 600 l oval - German Oak"
Form: Oval
Liter: 600 l
Recommended for:: Wine
Wood species: German Oak

Accessories

Stainless steel door for installation in round and oval vats
The doors are made of stainless steel (V4A) and open to the inside. All visible surfaces are polished and sanded, also the surface which has contact with the liquid. On demand the door can be equipped with a hole for a bunghole flaper with a screw plug for taps.Prices exclusive installation. The installation of the stainless steel doors at new vats can be chosen separately at Accessories. The installation at old vats will be charged according to efforts by our coopers. If you have any questions, please feel free to write us an email.

€863.94*
net: €726.00
Disc valve
The disc valve is made of stainless steel V4A and is available in DN40 and DN50. A cap and a chain made of V4A is inclusive. Please select correct version in pick list.

€216.58*
net: €182.00
Discharge valve
Discharge valve made of stainless steel V4AThe screw connection will be installed and secured with a lock nut at the lowest position on the bottom of the cask. The total discharge drainage will be installed on this connection  

€180.88*
net: €152.00
Bunghole flap for stainless steel barrel door
Typ: 70 mm
The bunghole flap is made of stainless steel (V4A) and is installed in the stainless steel barrel door. The flap is inside of the barrel and thanks to the pressure of the wine it is tight. Only if a pipe is inserted you can empty the vat.

€89.25*
net: €75.00
Diving shell
The diving shell is inserted in the wooden vat and is used as a connection for the thermometer.

€120.19*
net: €101.00
Tasting valve
Please select the required variant from the selection bar above.Sampling valve for large casks. Pre-installed with internal lock nut and external large washer.

€120.19*
net: €101.00
Bunghole filler and de-airing plug
V4A, external thread DN50 conical to screw it in the barrel, inside smooth for silicon bungs or fermentation locks.

€157.68*
net: €132.50
Tube holding
To fix the tube on the side of the rack or at the floor. Made of stainless steel V4A.

€49.98*
net: €42.00
Discharge drainage
Drainage with tube outlet N40/V4a. The discharge drainage can be installed on the side or in the middle of the vat to the front. It is connected through the filler cap. Available for:600 l - 1.300 l1.300 l - 2.500 l3.000 l - 5.000 l6.000 l - 7.000 l8.000 l - 9.000 l

€304.64*
net: €256.00
Thermometer
The thermometer is made of V4A stainless steel and has been filled with glycerin. It is for the usage in mash tanks in combination with the heat changing plates.

€89.25*
net: €75.00
Barrel screw for wooden barrel door
Barrel screw 120 mm, 160 mm, 180 mm or 220 mm made of stainless steel for a wooden barrel door. The screw fixes the door at the barrel. Suitable for barrels up to a volume of approx. 450 l. V4A with a MS-hat-screw nut.

€83.18*
net: €69.90
Fill level indicator valve
Stand glass valve for pipe 13/10 - wooden barrel version3/8" screw connection for stave wall up to 65 mmV4A - Valve V2AEquipped with a stand glass emptying valve (automatic) and a glas tube (approx. 10 cm long)A longer tube can be ordered under accessories.

€255.85*
net: €215.00
Laserbranding
We laser your individual logo, lettering or name onto the front or belly of a barrel.    Requirements for the template:     PDF or JPEG     Black / white (no grayscale)      Please send the template to laser@wilhelm-eder.dePlease indicate in your email:     The desired position (belly or head)     Your order number Please note:     The branding will be adapted to the size of the barrel     Without consultation, the laser branding will always be placed in the center     Maximum size of the branding is approx. 300 x 300 mm     This article only counts for one laser branding, for several barrels the corresponding number must be ordered     Lasered articles are personalized and excluded from exchange / return Above you can see some sample images that make it possible to design and individualize your keg using a laser.By ordering the "Laser branding" item, you confirm that you are the owner of the logo file or that you have acquired the right to use it.

€23.68*
net: €19.90