Home & Garden acceccoires

This will turn your rain barrel into a bath tub!The ladder and the bench are made in our carpenter's workshop from high-quality, durable Douglas fir wood.The steps are chamfered and equipped with non-slip grained coating.The bench is planed, connected with stainless steel screws and fine sanded.Our wood comes from sustainable forestry from the Palatinate forest. The wood is prepared in our own sawmill and dried in the air.During production, the wood is professionally cut, planed, glued, screwed and fine sanded by our carpenters. Depending on the customer's wishes, a suitable surface treatment is applied during the finishing process: oiled or natural. Note: Please note that each ladder and each bench is unique and the dimensions can be adjusted depending on the barrel. Due to the natural product wood, deviations in color and grain occur.

Base made of whiskey barrel staves (height approx. 10 cm), which ensures the safe standing of the barrel and prevents the barrel from drawing moisture from below.

Polished brass drain tap for installation on the wooden barrel as a water drain.¾” thread

As a general rule, our decorative barrels should not be placed directly on soil, grass, etc. The barrels should be placed on a solid base so that they don’t get damp underneath.  The cross-shaped stand elevates the barrels slightly. The added advantage for rain barrels with a drainage tap is that the tap is easily accessible and a container can be placed underneath it. Delivery: Two wooden pieces including 2 screws for self-assembly. Wood: Douglas fir, larch, ...(weather-resistant woods)Finishes: Natural, boat varnish, rosewood stain

Galvanized, 105 mm. Price per piece.

Impact, for each additional hole or cutout in the barrel. At the end of your order, please enter the desired shape, size and position of the opening in the comment field.    

We offer this practical folding lid as an alternative to the standard lid. The hinged split lid is mounted with two hinges and a wooden handle, so it is easy to open. The fixed section has a recess on the side through which you can insert a downpipe up to a diameter of 100mm directly into the barrel. Please note: pictures are examples.  Colour variations are possible. Please specify the desired outer diameter in the comment field at the end of the online order. When ordered together with a rain barrel, we fit the lid to the size of the barrel.  

Rheinzink rainwater collector set, with a Gardena aluminium hose connector, 6-piece. Comprehensive, economical roof drainage system - innovative and compliant with standards. Rheinzink represents the highest quality in the professional sector and is characterized by the best material properties and accuracy of fit.The Rheinzink rain collector is easy to connect to an existing downpipe. Only a section approximately 30cm long needs to be removed from the rainwater downpipe. A Gardena water stop for a standard ½ inch garden hose is included. Catch precious rain water with the Rheinzink rain collector The rain collector can be easily inserted into 100mm standard zinc downpipes. The rain collector connection should be approximately at the same height as the connection in the rain barrel. Saw out a section approx. 30cm from the existing downpipe and connect the rain collector.  On completion, the rain collector can be used immediately, provided that it has been installed correctly. The rain barrel rim should be 70mm or more above the connection point of the rain collector. If the water level is high enough, the water will flow out through the separator. The collector is so designed on the inside that the rainwater collects and is diverted into your rain barrel via the Gardena plug-in connector (suitable for all ½ inch garden hoses up to 5m long). Due to the length of the hose, the rain barrel no longer has to stand right next to the downpipe. The supplied hose is not intended to be connected to the front of the Gardena coupling. Rather, it is an extension option that can be connected directly to the rainwater thief if necessary. A suitable garden hose is connected to the Gardena coupling with regulation stop in order to stop the water supply if necessary, e.g. if the rain barrel would otherwise overflow.

Exclusive wooden grip for the lid of a rain barrel. We will also deliver two screws for each grip to facilitate self installation.If they are bought together with a rain barrel, we will mount the grip without additional fee.

Cover for water collector, made of weatherproof Douglas fir wood, approx. 20 mm thick. The diameter is adapted to the respective tub. The cover is divided into two parts.